- #FLOPPY DISK EMULATOR FOR KN6000 KEYBOARD SOFTWARE#
- #FLOPPY DISK EMULATOR FOR KN6000 KEYBOARD PC#
- #FLOPPY DISK EMULATOR FOR KN6000 KEYBOARD WINDOWS#
I reinstalled the floppy drive, but still want to do the upgrade, but do not know which of the 400+ emulators on eBay, Amazon, or any other source will work on the KN6000.
The second was an expensive Nalbantov which was made for a Technics organ and which the engineers thought would work in the KN6000 not so.
#FLOPPY DISK EMULATOR FOR KN6000 KEYBOARD SOFTWARE#
My first purchase was a “cheap” Chinese-made “GOTEK” which came without any software although the description showed a software CD when I queried the seller he said he would check with his supplier and let me know never heard back from him. However the later floppy emulators include this feature and send the correct signals to the keyboard when a pendrive is inserted or switched to a another virtual "floppy" without the need to fit the switch.Ĭan anyone tell me the correct emulator for installation to the KN6000? I have tried two different emulators and neither has performed satisfactorily. So the original floppy to USB emulators did not emulate this feature so when you installed them in say a KN6000 you had to do a modification and fit a switch which when pressed would send a signal to the keyboard to say a floppy had been inserted or changed.
#FLOPPY DISK EMULATOR FOR KN6000 KEYBOARD PC#
Computers such as the Apple Mac and Amiga used this feature but the PC did not, but the KNX000's do. Most floppy drives had a feature that allowed them to send a signal to the computer to say a disk had been inserted and the disk would then be automatically detected and loaded. The reason the older two digit emulators don't work without modification is that they were designed to make a USB pendrive emulate a floppy drive installed in a PC.
#FLOPPY DISK EMULATOR FOR KN6000 KEYBOARD WINDOWS#
My PC runs Linux and not Windows and with a bit of playing around I have found that with LInux it's possible to load your files onto any of the 999 "floppy disks". I explain why below.Īlso the presenter in the video for the KN6500 highlights the fact that once you have formatted the drive on the KN6X00 that although the USB stick is now the equivalent to 999 floppies, when plugged into a PC, the PC only "sees" the first floppy so you have to put your styles and midi files etc on this first "floppy" then use the KN6X00 to copy them to one of the other "floppy disks" on the USB stick and that this is a slow and laborious process. Mine works 100% without any electronic modification. If you get the more recent models that have the three digit display then you should not need to do the electronic modification. If you get the older version that has a two digit display and supports a USB appearing as if its 99 floppy disks then YOU DO need to do electronic modifications as shown in this video for a KN5000. However, it is important to get the right one. The simple Gotek ones costing from about 18euro (from China) work fine.
There are a few that are sold specifically for the KN6000 but cost about 90euro. However the issue is getting the right floppy to USB emulator. You basically just swap the floppy with the emulator. then you will find most of this is right for the KN6000 also but its easier on the KN6000 (or mine anyway) as the need to cut cable ties to lengthen the cable isn't even needed. If you look at this youtube video for the KN6500. I did some more investigation (I am an IT person) and they were both right in a way. The information for the KN6500 said this was a relatively simple swap while the one for the KN5000 said that I needed to carry out electronic modification to the USB emulator. I found information for the KN6500 and the KN3000 and KN5000 but those actually conflicted. I recently bought a KN6000 and searched for info on replacing the floppy with a USB port but didn't find anything specific.